Bare SAWL Steel Pipe

Send Inquiry
Bare SAWL Steel Pipe
Details
Bare SAWL steel pipe (also called bare LSAW pipe) leaves our mill with no pre-applied coating. For buyers who coat, line, galvanize or drive the pipe themselves, that is the point: there is nothing to strip, nothing to degrease, and nothing hiding the steel surface.
We supply it the way a coater or fabricator wants to receive it: round, straight, with the weld seam dressed and the ends prepared.
Category
LSAW Pipe
Share to
Description

Tianjin Brisk Metalwork Co., Ltd. is one of the leading manufacturers and suppliers of bare sawl steel pipe in China. We have world-leading production equipment and strong manufacturing capabilities. Please feel free to buy bulk durable bare sawl steel pipe from our factory.

 

PRODUCT

Tianjin Brisk Steel focus on produce and supply hollow section and steel pipe

EN 10217-1 LSAW PIPE
Large OD Heavy Wall LSAW Pipes
EN10210 LSAW STEEL PIPE
Thick Wall Straight Seam Welded Pipes

What "Bare" Means on Our SAWL Pipe

 

Delivery Condition What You Receive Best For
Bare, mill finish As welded and expanded, no oil, no varnish Blasting and coating, galvanizing, lining, driving as piles
Lightly oiled Thin rust-preventive film Longer yard storage before use
Varnished Black lacquer on request Short-term protection for pipe that will be painted on site

 

If you will blast and coat the pipe, tell us and we deliver it bare and un-oiled. Oil and varnish both have to be removed before blasting, so skipping them saves your coater a cleaning step.

 

What We Control on Bare SAWL Pipe

 

A coater or fabricator notices geometry before anything else. On bare pipe we control:

 

  • Roundness and diameter after cold expansion, so pipe runs true through coating-line rollers and fits end to end
  • Straightness, so heavy pipe sits flat in blasting and coating cradles
  • Weld seam dressing: the weld cap is blended to a smooth profile, so blasting and coating work over the seam without thin spots
  • Internal weld bead: height controlled to the specification and ground flush on request for lining or pigging
  • Surface imperfections: slivers, spatter and sharp edges ground out before dispatch
  • End preparation: square cuts or bevels to your drawing, with bevel faces protected
  • Marking: pipe number, heat number and seam position on every pipe

 

Why Does Rust Grade Matter on Bare Pipe?

 

Bare steel starts to rust the moment it is exposed to damp air. The question is how far it goes before blasting. ISO 8501-1 describes the starting condition in four grades:

 

Rust Grade Surface Condition Effect on Blasting
A Mill scale largely intact Easiest to bring to Sa 2.5
B Beginning to rust, scale flaking Normal blasting
C Scale rusted away, light pitting visible More time and abrasive
D General pitting visible Slowest, and pits may hold contaminants

 

We pack bare pipe on timber bearers with end caps, so it reaches you in grade A or B. If it will wait outdoors for months, ask for the lightly oiled condition instead.

 

Where Bare SAWL Pipe Is the Right Final Condition

 

Use Why Bare Works
Foundation and marine piles Coating would be scraped during driving; design allows for wall loss
Casing, sleeve and conductor pipe The pipe is encased or lined, so exterior finish is not the barrier
Concrete-encased and grouted pipe Concrete bonds directly and protects the steel
Structural columns and legs Painted on site after erection to the project paint system
Pipe for your coating or galvanizing line You apply 3LPE, FBE, epoxy or zinc on your own schedule
Pipe for spool and fitting fabrication Cut, bevel and weld without removing a factory coating

 

Case: 96 Pipes, OD 914 x 12.7 mm, Straight to Blast

 

A coating contractor ordered 96 pipes, OD 914 mm x 12.7 mm wall, 12 m each (1,152 m) for external 3LPE. Their previous lot arrived varnished, and the varnish had to be solvent-washed off before blasting. That added three working days to the schedule for the lot.

 

We delivered the new lot bare and un-oiled, with weld caps blended and ends bevelled. All 96 pipes went straight to the blast line on arrival, with no pre-cleaning day.

 

FAQ

Q: Is bare pipe the same as black pipe?

A: For SAWL pipe, they are close. Bare means no applied coating. Black usually means the same mill surface, often with a light oil film. Tell us which you need.

Q: Can my coater galvanize bare SAWL pipe?

A: Yes, if the bath is large enough. Large diameters and 12 m lengths may need double dipping, so confirm the bath size first.

Q: Can you apply rust-preventive oil for long storage?

A: Yes. We can supply bare pipe with a light oil film, but note it has to be removed before coating.

Q: Can the internal weld bead be ground flush?

A: Yes, on request, for pipe going to internal lining or pigging.

Related:SWAL STEEL PIPE

                    LSAW Pipe By Surface Treatment

Contact now

BRISK STEEL PRODUCT LINE
brisk steel product lines
ASTM A1085 STEEL PIPES
BRISK STEEL LSAW PRODUCT LINE

Hot Tags: bare sawl steel pipe, China bare sawl steel pipe manufacturers, suppliers, factory, aboveground lsaw pipe, diameter controllable steel pipe, efficient steel pipe, rigid steel pipe, steel pipe for bridge support, steel pipe for construction

Send Inquiry