Tianjin Brisk Metalwork Co., Ltd. is one of the leading manufacturers and suppliers of en 10210 structural hollow steel section in China. We have world-leading production equipment and strong manufacturing capabilities. Please feel free to buy bulk durable en 10210 structural hollow steel section from our factory.
Tianjin Brisk Steel is one of the EN 10210 Structural Hollow Steel Section in China. Our products are mainly exported to the Middle East, Southeast Asia, Europe, New Zealand, and other regions.If you would like to learn more about our products, feel free to contact us and send your purchase list.
Quick Snapshot
| Item | Detail |
|---|---|
| Standard | EN 10210 (identical to BS EN 10210) |
| Process | Hot-finished - seamless, or welded and normalized |
| Shapes | Square, Rectangular, Circular, Elliptical |
| Grade Families | Non-alloy (JRH/J0H/J2H/K2H) and fine-grain (NH/NLH) |
| Finish | Bare or hot-dip galvanized |
| Certification | EN 10204 3.1/3.2 mill certificate; CE documentation available for EU-bound orders |
What Do We Produce Under EN 10210?
Our EN 10210 range covers the full shape family from one production base:
- Square and rectangular hollow section (SHS/RHS) - welded and normalized, for general structural and building frame use
- Circular hollow section (CHS) - welded and normalized, common in trusses, bracing, and architectural exposed steelwork
- Seamless hollow section - true seamless, no weld seam at all, produced where a project specifically calls for it
- Fine-grain grades (NH/NLH) - normalized fine-grain steel for cyclic loading, lower service temperatures, and higher-consequence structural elements
All four prouction routes run through the same facility, so a project specifying different profiles or grade families across its structure - welded RHS columns and seamless CHS bracing, for example - can be sourced and shipped together rather than split across two suppliers.
What Sizes and Finishes Are Available?
We produce across the full EN 10210 size range, from smaller stock profiles through large-diameter and large-section sizes, in both non-alloy and fine-grain grades. Finish is a separate choice from grade and shape - every profile and grade family can be supplied bare or hot-dip galvanized, with galvanizing quality verified against the governing coating standard. Send us your shape, size, and grade and we'll confirm what's available from stock versus what needs a production run.
Why Choose Hot-Finished EN 10210?
Hot-finished construction - whether true seamless or welded-and-normalized - relieves the residual forming stress that cold-formed sections carry and gives a more uniform grain structure at the corners. This typically supports a more favorable design wall thickness basis in structural codes, which is why EN 10210 is often the standard called for on capacity-design connections, seismic bracing, and projects where corner strength under load matters most. If your structural calculation was already run against EN 10210 section tables, that's the standard to order to - substituting cold-formed EN 10219 material at matching nominal dimensions is not a like-for-like swap against that calculation.
Where Does EN 10210 Get Used?
- Building structure - columns and primary framing, where the favorable design wall basis supports lighter overall structure
- Bridges and infrastructure - both grade families, selected by load cycling and service temperature
- Mechanical and equipment structure - support frames for industrial equipment under cyclic loading
- Offshore-adjacent onshore structure - fine-grain NH/NLH grades for low-temperature toughness requirements
Why Order EN 10210 From Us?
- Full shape and process range - seamless, welded-and-normalized, square, rectangular, circular, and elliptical, from one facility
- Both grade families in stock production - non-alloy and fine-grain, so mixed-grade orders don't require two suppliers
- Full mill certification on every order, with CE documentation coordinated up front for EU-bound shipments
- Export experience across the Middle East, Southeast Asia, Europe, and New Zealand, with each market's documentation practice built into the quote
FAQ
Q: What's the difference between the non-alloy and fine-grain grade families?
A: Non-alloy grades (JRH/J0H/J2H/K2H) are the general-purpose structural range. Fine-grain grades (NH/NLH) carry tighter chemistry control and demonstrated low-temperature impact toughness, typically specified for cyclic loading or lower service temperatures.
Q: Can EN 10210 and EN 10219 material be substituted for each other?
A: Not without engineering review - one is hot-finished, the other cold-formed, and structural calculations are typically run against one standard's specific design wall thickness assumptions.
Q: Do you supply EN 10210 galvanized as well as black?
A: Yes, both grade families are available bare or hot-dip galvanized.
Q: What do you need to quote an EN 10210 order?
A: Shape, size, grade (or your application and load case if you're not sure which grade applies), quantity, finish, and whether CE documentation is needed for your destination market.
Hot Tags: en 10210 structural hollow steel section, China en 10210 structural hollow steel section manufacturers, suppliers, factory
