ASTM A53/A53M Seamless Steel Pipes

Send Inquiry
ASTM A53/A53M Seamless Steel Pipes
Details
Product name:ASTM A53/A53M Welded Steel Pipes、ASTM A53/A53M SMLS Steel Pipes、ASTM A53/A53M Black Pipes、ASTM A53/A53M Hot-Dip Galvanized Pipes
Brand: Tianjin Brisk Metalwork Co.,Ltd
ASTM A53 is a standard for welded and seamless steel pipes established by the American Society for Testing and Materials (ASTM), widely used in fluid transportation, structural engineering, and other fields.performance in humid, acidic, and other corrosive environments.
Category
Seamless Pipe
Share to
Description

Products Size

·Pipe diameter range: 1/8 inch to 24 inches (DN6 ~ DN600)
·Wall thickness grades: Sch 10, Sch 20, Sch 30, Sch 40, Sch 80, etc.
·Length: typically 6 meters, 12 meters, or customized as required

Size Range as follows:

NPS O.D Nominal Wall Thickness
DN INCH MM SCH5S SCH10S SCH10 SCH20 SCH30 SCH40 SCH60 SCH80 SCH100 SCH120 SCH140 SCH160 STD XS XXS
50 2" 60.3 1.65 2.77 - - - 3.91 - 5.54 - - - 8.74 3.91 5.54 11.07
65 2 1/2" 73 2.11 3.05 - - - 5.16 - 7.01 - - - 9.53 5.16 7.01 14.02
80 3" 88.9 2.11 3.05 - - - 5.49 - 7.62 - - - 11.13 5.49 7.52 15.24
90 3 1/2" 101.6 2.11 3.05 - - - 5.74 - 8.08 - - - - 5.74 8.08 -
100 4" 114.3 2.11 3.05 - - - 6.02 - 8.58 - 11.13 - 13.49 6.02 8.56 17.12
125 5" 141.3 2.77 3.4 - - - 6.55 - 9.53 - 12.7 - 15.88 6.55 9.53 18.05
150 6" 168.3 2.77 3.4 - - - 7.11 - 10.97 - 14.27 - 18.26 7.11 10.97 21.95
200 8" 219.1 2.77 3.76 - 6.35 7.04 8.18 10.31 12.7 15.09 18.26 20.62 23.01 8.18 12.7 22.23
250 10" 273.1 3.4 4.19 - 6.35 7.8 9.27 12.7 15.09 18.26 21.44 25.4 28.58 9.27 12.7 25.4
300 12" 323.9 3.96 4.57 - 6.35 8.38 10.31 14.27 17.48 21.44 25.4 28.58 33.32 9.53 12.7 25.4
350 14" 355.5 3.96 4.78 6.35 7.92 9.53 11.13 15.09 19.05 23.83 27.79 31.75 35.71 9.53 12.7 -
400 16" 406.4 4.19 4.78 6.35 7.92 9.53 12.7 16.66 21.44 26.19 30.96 36.53 40.49 9.53 12.7 -
450 18" 457.2 4.19 4.78 6.35 7.92 11.13 14.27 19.05 23.83 39.36 34.93 39.67 45.24 - - -
500 20" 508 4.78 5.54 6.35 9.53 12.7 15.09 20.62 26.19 32.54 38.1 44.45 50.01 - - -
550 22" 558.8 4.78 5.54 6.35 9.53 12.7 - 22.23 28.58 34.93 41.28 47.63 53.98 - - -
600 24" 609.6 5.54 6.35 6.35 9.53 14.27 17.48 24.61 30.96 38.89 46.02 52.37 59.54 - - -
                                   

Products Description

Two types
 
2025121215141265215
 

A53/A53M Hot-Dip Gal Pipes

Pickling → Activation → Immersion in 450-460℃ zinc bath to form zinc-iron alloy layer, followed by pure zinc layer.Complies with ASTM A123/A153; minimum zinc coating weight ≥8 oz/ft² (≈550 g/m²)

 

ASTM A53/A53M Black Pipes

After rolling/welding without galvanizing, the surface has been descaled, pickled, or mechanically cleaned.Rust-free, free of harmful defects, can be coated with anti-rust oil

2025-12-29102229351

 

 
Products Standard
  C Mn P S Cu① Ni① Cr① Mo① V①
Type S Grade A 0.25② 0.95 0.05 0.045 0.4 0.4 0.4 0.15 0.08
Grade B 0.3③ 1.2 0.05 0.045 0.4 0.4 0.4 0.15 0.08
 
Type E Grade A 0.25② 0.95 0.05 0.045 0.4 0.4 0.4 0.15 0.08
Grade B 0.3③ 1.2 0.05 0.045 0.4 0.4 0.4 0.15 0.08
 
Type F Grade A
Grade B
0.3② 1.2 0.05 0.045 0.4 0.4 0.4 0.15 0.08
①The total compisition for these five elements shall not exceed 1.00%.
② For each reduction of 0.01% below the specified C maximum, an increase of 0.06% Mn above the specified maximum will be permitted up to a maximum of 1.35%.
③For each reduction of 0.01% below the specified C maximum, an increase of 0.06% Mn above the specified maximum will be permitted up to a maximum of 1.65%

Mechanial Properties

  Grade Min. Tensile Strength Min. Yield
Strength
Type S
Type E
Grade A 330Mpa 205Mpa
 
Type S
Type E
Grade B 415Mpa 240Mpa
 
Type F Grade A 330Mpa 205Mpa

 

·(Type S): Hot forged and formed, seamless
Cold expansion is allowed (outer diameter expansion ≤1.5%) to optimize dimensional accuracy;
Seamless, uniform overall strength, suitable for high-pressure service (e.g., steam, oil and gas transportation).

·(Type E, ERW): High-Frequency Electric Resistance Welding of Strip Steel
Welds must be continuous without cracks, pass electromagnetic/ultrasonic testing;
High production efficiency and low cost, suitable for low-pressure fluid and structural pipes.

·(Type F, Furnace Butt-Welded): High-temperature furnace butt welding
Limited to Grade A, weld strength lower than base material, not suitable for high-pressure or flanging applications;
Ancient process, now mostly used for low-pressure water pipes and HVAC systems, with a low market share.

 

Applicant Field

20251230115113962214
Drainage system
Used for urban main water supply pipes, secondary water supply pipelines in residential areas, and rainwater drainage networks, the galvanized coating can resist corrosion from underground damp soil or outdoor environments.
2025-12-29102229351
Gas and Fuel Transportation
Used for courtyard branch pipes of city gas and natural gas (main pipes often use higher standard API 5L pipes), it can also be used for low-pressure pipelines for factory fuel oil and liquefied petroleum gas, and corrosion-resistant coatings must be applied during installation.
2025121215112262215
Permanent building structural components
Used for making steel fences, railings, stair handrails, and billboard supports, hot-dip galvanized pipes can increase outdoor service life; they can also be used as columns and beams for light steel structures.
20251212151648437214
Agriculture and Animal Husbandry
Manufacturing agricultural greenhouse frames, livestock fences, and feed delivery pipelines at a low cost, meeting the low-cost requirements of agricultural production.

 

 

Hot Tags: ASTM A53/A53M Seamless Steel Pipes, China ASTM A53/A53M Seamless Steel Pipes manufacturers, suppliers, factory, seamless pipe integration, seamless pipe advantage, seamless pipe safety, seamless pipe deal, seamless pipe efficiency, seamless pipe mechanical properties

Send Inquiry