Tianjin Brisk Metalwork Co.,Ltd is one of the manufacturers of EN 10210 S460NH rectangular hollow section in China. Our products are mainly exported to the Middle East, Southeast Asia, Europe, New Zealand, and other regions.If you would like to learn more about our products, feel free to contact us and send your purchase list.
Chemical Composition
- EN10210 S460NH, S460NLH rectangular hollow section Chemical Composition Analysis:
|
C |
Si |
Mn |
P |
S |
Ni |
Cr |
|
≤0.22% |
≤0.60% |
1.00-1.70% |
≤0.035% |
≤0.025% |
≤0.8% |
≤0.3% |
|
Mo |
Cu |
Nb |
V |
Ti |
Al |
N |
|
≤0.2% |
≤0.55% |
≤0.05% |
≤0.2% |
≤0.05% |
≥0.02% |
≤0.025% |
Mechanical Properties
|
Tensile Strength |
Yield Strength |
Elongation Rate |
||
|
W.T. ≤16mm |
16mm＜W.T. ≤ 40 mm | 40mm＜W.T. ≤ 65mm | ||
|
540–720 MPa |
≥460 MPa |
≥440 MPa |
≥ 430 MPa |
≥15% |
More Introduction of EN10210 S460NLH
- EN 10210 S460NH refers to a high-strength, hot-finished structural hollow section (steel pipe/tube) made from non-alloy or fine-grained steel
- Properties: High yield strength, excellent toughness, good weldability (low carbon content), smooth surface finish from hot forming, and consistent properties.
- Applications: Building frameworks (stadiums, public buildings), bridges, communication towers, offshore platforms, heavy machinery supports, and transportation.
Hot Tags: en 10210 s460nlh steel hollow section, China en 10210 s460nlh steel hollow section manufacturers, suppliers, factory, building with hollow section, EN 10210 HOT FINISHED HOLLOW SECTION, EN 10219 HOLLOW SECTIONS, HOT FINISHED SQUARE HOLLOW SECTIONS, metal hollow section, welded hollow section
