En 10210 S355nh Hollow Section

Fully normalized structural hollow sections, compliant with EN 10210:S355NH

Normalized fine grain steel, so free of internal stresses and with a minimum strength of 355N/mm2 allowing the highest fabrication factors and enabling material cost savings and lighter structures

Supplied normalized and compliant to both 'NH' and 'J2H' J0H JRH classifications

Available in a wide size range of square (40 x 40 x 3.2mm to 600 x 600 x 50mm) rectangular (50 x 30 x 3.2mm to 800 x 400 x 30mm), elliptical (300 x 150 x 8mm to 1200 x 1000 x 50mm) and circular (42.4 x 3.2mm to 1420 x 50mm) hollow sections

Tight corner radii (<2T) exceeding the standard - enhancing the product's aesthetic appeal whilst avoiding the risk of brittle fracture which occurs in some cold formed products

Excellent dimensional consistency, high levels of formability, suitable for galvanising and, because the steel is fully-killed, excellent weldability

Fully compliant with CE marking and certified as suitable for all structural applications; overcomes design risks associated with other forms of hollow sections

Certified as suitable for mechanical applications, especially those involving cyclical loading

Suitable for low temperature applications (40J @ -20°C)

Batch-tested to give the properties of the specific delivered material; full test certification supplied

Clearly marked as S355NH, and supplied with a 3.1 test certificate for the reassurance of batch traceability

Full technical support available

Excellent supply availability through approved stockholders