EN 39 GI SCAFFOLDING PIPE

EN39 Scaffolding Tubes

EN39 Hot dip galvanized scaffolding tube

EN39 S235GT Scaffolding pipe

BS1139 Scaffolding pipes

MS1462 Scaffolding pipes

EN 10219 Scaffolding pipes in GCC
European standard EN39 regulates the production and use of non-alloy carbon steel welded round scaffolding tubes, which are ideal for scaffolding in construction projects.

BRISK STEEL uses only the highest quality steel to manufacture EN39 scaffolding tubes. Steel grades include S235GT, S355J2H S355J0H etc. A variety of surface coatings are available, including zinc, epoxy and paint.

The surface needs to be clean and free of grease and low in sulfur. Together with BS1139, it constitutes one of the most popular scaffolding steel tube standard systems.

BS EN39 Scaffolding Pipe Specification
Standard BS EN39
Procedure SMLS/ERW
Dimensions 48.3mm
1 1/2″
DN40
Thickness 3.2mm, 4mm
Unit Length 6 meters, 6.4 meters or customized from 4 meters to 12 meters.
Steel Grade BS EN39 S235GT
Surface Coating Painted, Oiling, Hot Dip Galvanizing
End Type Square cut
Joint Method Fitting, Flange, Coupling, Clamp, Pipe Shoulder, Welding
Pipe Machining Welding, Bending, Hole Drilling, Punching, Swaging, Tapering, Flaring, Expanding
Dimension of EN39 Scaffold Tube
Outside Diameter Wall Thickness
Type 3 Type 4
48.3 mm 3.2 mm 4.0 mm
Chemical Requirement
Mechanical Requirement
Steel Grade Chemical Composition in %,by mass Mechanical Properties
Steel Name Steel Number C Si Mn P S Al Yield Strength
ReH
min Tensile Strength
Rm Elongation
A
min
max. max. max. max. min. MPa MPa %
S235GT 1.0106 0.20 a,b 1.4 0.04 0.045 0.02 235 340/520 24
a： ≤0.05% (range 1)(≤0.04% if option 2 is specified )or ≥0.15%≤0.25%(range2).
b：When bare tubes are specified(see option 8)the range shall be reported at the time of enquiry and order.